Performanceprobe.info

For megasquirt you need to modify the distributor to work, not plug and play. thanks to the topic over at Mx6.com Modifying the turbo distributor. For Megasquirt, we need a RPM input. The simplist way to achive this input on the turbo engine, is using the factory VR sensor and trigger wheel. BUT, in...

I heard the dollar was dropping down, hopefully it goes back up

Just let me know, will try to help.

thank you. I checked and it's ok. the problem is not there! my 1989 GT 2.2 turbo probe is defective with no spark. I got the flash codes which are numbers 03 and 04. 03 cylinder identification sensor A 04 cylinder identification sensor B please what are these sensors? That would be the two sensors ...

thank you. I checked and it's ok. the problem is not there! my 1989 GT 2.2 turbo probe is defective with no spark. I got the flash codes which are numbers 03 and 04. 03 cylinder identification sensor A 04 cylinder identification sensor B please what are these sensors? That would be the two sensors ...

Diagrams are here http://performanceprobe.info/performanceprobe/forums/viewtopic.php?f=36&t=30, To test the module, check for voltage in the plug for the coil, it should have voltage all the time on wire when the engine is cranking, if no power at the coil plug, check ignition power relay, it is und...

Commerical ws for a 1990 model, but they used an 1989

Update the style of the site, fresh new look.