Post here for issues

Ask questions concerning problems with a first generation Probe.
User avatar
1stgenWizard
Site Admin
Posts: 173
Joined: Mon May 14, 2018 4:23 pm
Location: Florida
Contact:

Post here for issues

Post by 1stgenWizard » Mon May 14, 2018 6:43 pm

Have a problem ask away....
8-)

Fernando
Posts: 8
Joined: Tue Sep 08, 2020 1:06 am

Re: Post here for issues

Post by Fernando » Tue Sep 08, 2020 2:08 pm

does anyone have the wiring diagram of the GT 2.2 89? :?:
know how to test this module?
Attachments
Screenshot_20200907-225635.png
Screenshot_20200907-225635.png (1.2 MiB) Viewed 22900 times

User avatar
1stgenWizard
Site Admin
Posts: 173
Joined: Mon May 14, 2018 4:23 pm
Location: Florida
Contact:

Re: Post here for issues

Post by 1stgenWizard » Tue Sep 08, 2020 7:37 pm

Diagrams are here viewtopic.php?f=36&t=30,

To test the module, check for voltage in the plug for the coil, it should have voltage all the time on wire when the engine is cranking, if no power at the coil plug, check ignition power relay, it is under the cover on the back behind engine, it is yellow. If there is power there. I would suspect the module, also another thing is to check for corrosion, dirty connections at the ignition module.
8-)

Fernando
Posts: 8
Joined: Tue Sep 08, 2020 1:06 am

Re: Post here for issues

Post by Fernando » Thu Sep 10, 2020 6:35 pm

thank you. I checked and it's ok.
the problem is not there!
my 1989 GT 2.2 turbo probe is defective with no spark.
I got the flash codes which are numbers 03 and 04.
03 cylinder identification sensor A
04 cylinder identification sensor B

please what are these sensors?

Fernando
Posts: 8
Joined: Tue Sep 08, 2020 1:06 am

Re: Post here for issues

Post by Fernando » Thu Sep 10, 2020 6:37 pm

I'm from Brazil.
this is the only Ford 1989 turbo GT probe in the country.

Fernando
Posts: 8
Joined: Tue Sep 08, 2020 1:06 am

Re: Post here for issues

Post by Fernando » Thu Sep 10, 2020 6:39 pm

:D
Attachments
IMG-20200729-WA0118~2.jpg
would these be the defective sensors?
IMG-20200729-WA0118~2.jpg (113.56 KiB) Viewed 22877 times

User avatar
1stgenWizard
Site Admin
Posts: 173
Joined: Mon May 14, 2018 4:23 pm
Location: Florida
Contact:

Re: Post here for issues

Post by 1stgenWizard » Thu Sep 10, 2020 6:44 pm

Fernando wrote:
Thu Sep 10, 2020 6:35 pm
thank you. I checked and it's ok.
the problem is not there!
my 1989 GT 2.2 turbo probe is defective with no spark.
I got the flash codes which are numbers 03 and 04.
03 cylinder identification sensor A
04 cylinder identification sensor B

please what are these sensors?
That would be the two sensors in the distributor. Have you checked the plug for corrosion to the distributor?

The sensors are probably bad, I can get you another distributor for $250, shipping will be extra.
8-)

Fernando
Posts: 8
Joined: Tue Sep 08, 2020 1:06 am

Re: Post here for issues

Post by Fernando » Thu Sep 10, 2020 6:55 pm

1stgenWizard wrote:
Thu Sep 10, 2020 6:44 pm
Fernando wrote:
Thu Sep 10, 2020 6:35 pm
thank you. I checked and it's ok.
the problem is not there!
my 1989 GT 2.2 turbo probe is defective with no spark.
I got the flash codes which are numbers 03 and 04.
03 cylinder identification sensor A
04 cylinder identification sensor B

please what are these sensors?
That would be the two sensors in the distributor. Have you checked the plug for corrosion to the distributor?
yes I checked. are corrosion free.
but the wires are very old and brittle.
I will have to replace. on the multimeter are giving more than 270 ohms.
the problem and buy another one because it doesn't exist here.
for me importing one from the USA will cost me more than 2000 $, I will have to adapt from another car.

User avatar
1stgenWizard
Site Admin
Posts: 173
Joined: Mon May 14, 2018 4:23 pm
Location: Florida
Contact:

Re: Post here for issues

Post by 1stgenWizard » Thu Sep 10, 2020 6:56 pm

Fernando wrote:
Thu Sep 10, 2020 6:55 pm
1stgenWizard wrote:
Thu Sep 10, 2020 6:44 pm
Fernando wrote:
Thu Sep 10, 2020 6:35 pm
thank you. I checked and it's ok.
the problem is not there!
my 1989 GT 2.2 turbo probe is defective with no spark.
I got the flash codes which are numbers 03 and 04.
03 cylinder identification sensor A
04 cylinder identification sensor B

please what are these sensors?
That would be the two sensors in the distributor. Have you checked the plug for corrosion to the distributor?
yes I checked. are corrosion free.
but the wires are very old and brittle.
I will have to replace. on the multimeter are giving more than 270 ohms.
the problem and buy another one because it doesn't exist here.
for me importing one from the USA will cost me more than 2000 $, I will have to adapt from another car.
I can get you one cheaper $250 usd before shipping
8-)

Fernando
Posts: 8
Joined: Tue Sep 08, 2020 1:06 am

Re: Post here for issues

Post by Fernando » Thu Sep 10, 2020 7:01 pm

1stgenWizard wrote:
Thu Sep 10, 2020 6:56 pm
Fernando wrote:
Thu Sep 10, 2020 6:55 pm
1stgenWizard wrote:
Thu Sep 10, 2020 6:44 pm


That would be the two sensors in the distributor. Have you checked the plug for corrosion to the distributor?
yes I checked. are corrosion free.
but the wires are very old and brittle.
I will have to replace. on the multimeter are giving more than 270 ohms.
the problem and buy another one because it doesn't exist here.
for me importing one from the USA will cost me more than 2000 $, I will have to adapt from another car.
I can get you one cheaper $250 usd before shipping
ok your price is good. but it will still be expensive. it will be around 1300 $ for me. not counting the freight. if i can't adapt i will have to buy from you.

Post Reply