Blower Motor Resistor Location

Ask questions concerning problems with a first generation Probe.
Post Reply
mrdeeds
Posts: 2
Joined: Sun Jul 11, 2021 2:09 am

Blower Motor Resistor Location

Post by mrdeeds » Sun Jul 11, 2021 2:17 am

I been looking under the dash on the passenger's side and can't find anything resembling it. Any help would be appreciated.

User avatar
1stgenWizard
Site Admin
Posts: 158
Joined: Mon May 14, 2018 4:23 pm
Location: Florida
Contact:

Re: Blower Motor Resistor Location

Post by 1stgenWizard » Mon Jul 12, 2021 6:04 pm

Remove the glove box and plastic panel above your feet on the passenger side. It is located by the blower fan.
8-)

mrdeeds
Posts: 2
Joined: Sun Jul 11, 2021 2:09 am

Re: Blower Motor Resistor Location

Post by mrdeeds » Sat Jul 17, 2021 10:23 pm

I know where it should be by the pictures you posted, but it isn't. Removing the kick plate and glove box, I can clear access to the blower motor but can't see anything with two bolts and connectors like the two pictures. Could it have been relocated elsewhere further from the blower motor?

User avatar
1stgenWizard
Site Admin
Posts: 158
Joined: Mon May 14, 2018 4:23 pm
Location: Florida
Contact:

Re: Blower Motor Resistor Location

Post by 1stgenWizard » Sun Jul 18, 2021 1:28 am

All you will see is the wires plugged into this. The rest of it is inside.
Attachments
blowermotorresistor.jpg
blowermotorresistor.jpg (22.38 KiB) Viewed 656 times
8-)

Post Reply