Total top feed injector servicing ; Send us your injectors to be professionally cleaned and refurbished.

Injector bodies cleaned, visually inspected, and individually numbered for full traceability

Coil testing: resistance, shorts, and current draw measured on every injector

Initial baseline test on ASNU bench: leak test, spray pattern analysis, and flow rate all recorded. This is the "before" data you'll see in your portal.

Full disassembly: remove filter baskets, o-rings, and pintle caps

Bead-blast removes paint, corrosion, and external deposits from metal injector bodies

First ultrasonic cleaning cycle that removes particles, dirt, and external debris (5-10 minutes)

Second ultrasonic cycle with pulsed on/off cycling to dislodge stubborn internal deposits (15-20 minutes)

High-pressure back-flush removes any remaining particles from internal passages

New filter baskets, o-rings, and pintle caps installed, included in service price at no extra charge

Complete retest on ASNU bench: spray pattern, flow rate, and leak check with full data capture. This is your "after" data.