Attachment III - Technical Information

ATTACHMENT III
91M76 PROGRAM

OWNER NOTIFICATION PROGRAM 91M76 MUFFLER REPLACEMENT

TECHNICAL INSTRUCTIONS

INSPECTION PROCEDURES:

1. Visually inspect the muffler outer metal wrapping (shell) for rust, peeling and/or looseness. If the metal wrapping has rusted and is peeling or has separated from the seams, replace the muffler assembly, attaching nuts and gasket.

NOTE
IF INSPECTION REVEALS A REPLACEMENT MUFFLER (IE. NOT ORIGINALLY INSTALLED BY THE MANUFACTURER) AND THE OUTER SHELL IS NOT PEELING:

THE CUSTOMER MAY CHOOSE TO KEEP THE AFTER-MARKET MUFFLER AND ACCEPT A REFUND; OR

HAVE A FORD SERVICE MUFFLER INSTALLED IN PLACE OF A CASH REFUND.

2. Rusted exhaust pipes, resonator, hangers, shields and or converters are not covered by this program.

REPLACEMENT PROCEDURES:

1. Reference the 1989 Probe Shop Manual, Section 26-02 pages 7 through 11 for muffler removal and replacement details.