Required Tools and Equipment

The following equipment is required to diagnose and repair the Electronic Engine Control (EEC) system:

Super Star II Tester:

Super STAR II Tester (Rotunda 007-0041A, or equivalent)

Super Star II Test Adaptor:

4EAT Super Star II Test Adapter:

Super STAR II Adaptor (Rotunda 007-00036 and 007-00095)

Analog Volt/Ohm Meter:

Analog Voltmeter, 0-20 Volts DC (alternate to Super Star II)

Jumper Wire:

Jumper Wires

Vacuum Gauge:

Vacuum Gauge (Rotunda 059-00008, or equivalent)

Tachometer:

Tachometer (Rotunda 059-00010, or equivalent)

Vacuum Pump:

Vacuum Pump (Rotunda 021-00014, or equivalent)

Digital Volt-Ohmmeter (DVOM):

Digital Volt-Ohm Meter (DVOM) (Rotunda 014-00407, or equivalent)