Indexing

NOTE: When servicing wheels or tires, the following procedure for matching the tire and wheel must be followed to ensure that the best possible ride characteristics are maintained:

1. When removing a worn tire from a wheel, mark the valve location on the tire prior to removal.
2. If the original tire is to be remounted, index the valve mark on the tire to the valve of the original wheel. Go to step 6.
3. If a new wheel is being installed, locate the tire matching point based on the valve position on the original wheel relative to its matching point described in step 4.
4. Locate the matching point on the wheel. The matching point on wheels is at the tire valve.
5. Locate the matching point on a new tire. Many replacement tires as well as original equipment tires are marked for first harmonic matching to the wheel. These marks vary in type and color. Consult the tire dealer for details or mark identification.
6. Mount the tire on the wheel and line up the paint mark or sticker on the new tire sidewall or the matching point of the original tire with the mark on the wheel or the tire valve.
7. Inflate and balance the tire/wheel assembly.