Band Apply Servo, A/T

GENERAL
Piston Outer Diameter 78.0 mm (3.07 inch)
Retainer Inner Diameter 40.0 mm (1.57 inch)

TIGHTENING SPECIFICATIONS
Servo Rod
Step 1: Tighten piston stem to 11-14 Nm (105-130 inch lbs.).
Step 2: Loosen the piston stem 1.5 turns counterclockwise.
Step 3: Tighten servo rod nut to 25-39 Nm (19-28 ft. lbs.).

NOTE: Hold servo rod stationary while performing step 3.