Fluid Pump: Specifications

GENERAL
Clearance
Between The Oil Pump Housing And The Outer And Inner Rotor
Standard clearance 0.02-0.04 mm (0.0008-0.0015 inch)
Maximum allowable clearance 0.05 mm (0.0019 inch)
Between The Oil Pump Boss And The Inner Rotor.
Standard clearance 0.040-0.115 mm (0.0016-0.0045 inch)
Maximum allowable clearance 0.124 mm (0.0049 inch)
Planet Gear Bearing Thrust Washer, Outer Diameter 88.0 mm (3.46 inch)
Spool Valve, Outer Diameter
Standard 13.970-13.980 mm (0.5500-0.5503 inch)
Minimum 13.970 mm (0.5500 inch)
Spool Valve Spring
Outer Diameter 13.0 mm (0.512 inch)
FREE LENGTH 53.0 mm (2.09 inch)
No. of Coils 12.0
Wire Diameter 1.2 mm (0.047 inch)

TIGHTENING SPECIFICATIONS
Oil Pump Cover Bolts 8-10 Nm (71-88 inch lbs.)
Spool Valve Plug 32-47 Nm (24-34 ft. lbs.)
Pump to Transaxle Case 19-25 Nm (14-18 ft. lbs.)
Oil Pressure Relief Plug 12-17 Nm (106-150 inch lbs.)